LIFETIME PROTECTION

CleanSafe®'s SAFETY  characteristics are:

• Completely SAFE for anybody to use. CleanSafe® is environment and human friendly. It does not contain harmful ingredients and none of the CleanSafe® products requires (and ever will require) any warning or safety labeling.
• Completely SAFE for the surfaces it is made for. Most of these surfaces (TFT LCD etc. SCREENS but also CD/DVD and Spectacles) consist of many layers of (sensitive) coatings. CleanSafe® is made to clean and protect these coatings and is found to be completely safe by many (independent) tests of Manufacturers, Universities and Laboratories.
• Completely SAFE for the Electronics of the systems. CleanSafe® is virtually non-conductive and does not promote short-circuiting or cause corrosion.

To view a short video explaining the important Safety and 
Non-conducitivity characteristics of CleanSafe®
please push the play ( > ) button.

High resistance / Non conductivity is of crucial importance when cleaning electronic products such as TFT LCD PLASMA Screens, Televisions, Keyboards, Mice, PC Housing, PDA's and Telephones.

• It is often underestimated (with many damages as a result) that cleaning products, especially when working with electronics, should be 'low or non- conductive'. In other words should not cause problems with the electric products it is used for.
• It is generally known to be careful with water and electricity. The reason is that water is HIGH conductive, so it easily creates shortcircuit problems with electronic products.
• A comparative study  (details available.. see introduction) of more than 80 cleaners have shown that ALL cleaners have high to very high conductivity. These cleaners are dangerous to be used with electronics.
• One of the major Safety factors of CleanSafe® is that it is virtually non-conductive. Laboratory tests are available.
• In addition to all other applications CleanSafe can safely be used to clean a wide variety of electronic products.

CleanSafe's PROTECTION characteristics are:

• It prolongs the optimal usage life of your screen
• CleanSafe® products are made by using, amongst others, nano-technology. For protection this means that CleanSafe® applies an unheard of tiny layer (which still can be felt, not seen!) on the cleaned surfaces. In technical terms: the protection layer is approx. 8 nanometer, which is a fraction of a fraction of a fraction of a hair thickness. Attached picture depicts the layer. Measurement was done by the renowned PTG group of the Techn. University of Eindhoven. (details.. see above).
• For practical purposes this means that surfaces which have been treated with CleanSafe® are protected against dirt and if they become dirty they can be much easier cleaned than if these surfaces did not have the protection layer. Practice has revealed that dirty screens which were not protected by CleanSafe® could not (anymore) be cleaned, whereas protected screens were easy to clean!  For this reason major Screen manufacturers treat their screens in the factories with CleanSafe® before they are shipped.

CleanSafe® does not contain any harmful or toxic elements and is not packaged in an aerosol container. This is important for cleaning and protection of TFT TV LCD Screens, CD/DVD, Mobile and electronic products in general because of:

• Toxic products (incl. alcohol and derivatives found in many cleaners - look at the labels!) are detrimental for sensitive surfaces such as coatings on Screens, CD/DVD etc. These toxic products will slowy but surely dissolve and damage these coatings.
• CleanSafe® products are not only non-toxic. They do not contain any harmful ingredient for to be treated surfaces. Examples are: very low hardness (no chalk, like in water with high risk of gradual contamination of surfaces; soft; neutral pH (important for coatings). Individual products have additional specialized characteristics - details available..see above.
• Pressurized / Aerosol products contain gasses which have shown to negatively effect coatings. In addition the pressure which is applied on the surfaces by spraying on it will further damage coatings. From all perspectives the use of pressurized products should be avoided and is not necessary as regular sprays and drip systems can perform this function the same or better. 

GREEN factors in the CleanSafe® product line are:

• All ingredients of CleanSafe® are completely environmentally friendly. Waste can without any effect to human or nature be disposed of with other houeshold waste.
• All packing material of CleanSafe is recyclable and/or destroys itself in a most natural way
• In the production process of CleanSafe® products, all elements are judged to be as environmentally safe as possible.
• CleanSafe® products are safe for humans. Children who touch treated surfaces will not face any problem.
• CleanSafe® is extremely efficient to use. Only a minimal amount of liquid is needed to clean and protect surfaces. This helps to reduce waste significantly.
• CleanSafe® products do not (have to) carry any warning sign. Warnings phrase or warning symbols all identify that some kind of danger is inherent when using a product. Also looking at the newest EU regulations CleanSafe®'s safety is way ahead of the most stringent requirements. We want users to be and feel completely safe with the products for themselves, their family and friends, the equipment they are using it on and for the environment.
• Protection: In addition CleanSafe not only cleans but most importantly protects the surfaces on which it is applied. This ensures a longer optimal life of the products it is used on.
• And of course all of the above is in addition to CleanSafe's guarantee